Duman Kontrol Damperleri

Rectangular smoke control dampers with air extract function, for smoke extraction with mechanical smoke extract systems or as an additional supply air inlet

• Complies with product standard DIN EN 12101-8 and is classified in accordance with DIN EN 13501-4
• Classified EI 90/120 (vedw,how i<->o) S 1000/1500 Cmod AA multi
• Pressure level 2 (-1000 Pa - 500 Pa) and pressure level 3 (-1500 Pa - 500 Pa) depending on usage
• Can be used in smoke extract systems or in heating and ventilation systems or in a combination of these
• For systems that require automatic release (AA)
• Wide range of application options for fire compartment separation
• Single-blade room partitioning with mechanical resistance
• Sheet steel construction in lightweight design
• Silicone free
• No stop bars, therefore large free cross-section
• Leakage tightness class at least 3C for casing and damper tightness, in accordance with DIN EN 1751
• Thermal insulation with insulating wool (optionally, as it depends on the airflow direction)
• Connection to air ducts in accordance with DIN EN 1366-1 and DIN EN 1366-8 (self-contained duct system or thermally insulated) or tested in accordance with DIN EN 1366-9
• For smoke extract ducts made of sheet steel or independent smoke extract ducts from 35 mm wall thickness and in air shafts
• Integration into the management and control equipment with TROXNETCOM or with various control bus systems possible

Rectangular smoke control dampers with extract ventilation function, for smoke extract with mechanical smoke extract systems or as an additional supply air inlet

• Nominal sizes 200 × 200 – 1500 × 800 mm, in increments of 1 mm
  
• Casing, damper blade and actuator encasing made of temperature-resistant calcium silicate
  
• Remote control with actuator
  
• Pressure level 3 (operating pressure –1500 to 500 Pa)
  
• Manual or automatic release
  
• For smoke extract ducts from 35 mm wall thickness
  
• Cmod = ventilation function and intermediate positions for flow rate balancing
  
• Casing air leakage to EN 1751, class C

Optional equipment and accessories

• Connecting subframe
  
• Cover grille
  
• Integration into the central BMS with TROXNETCOM